Following the line of inventions of renewable energy, today I bring you another special, this time to make a wind turbine. Like the previous special make a solar panel , this is also the same author, and we have commissioned to translate.
The main characteristics of this wind turbine can vary by type of motor or generator that you installed, but normally will be about efficient voltage 12V. Enjoy this invention making it as much as I translated for you:
After many searches for information all over the Internet, I realized that all designs had five things in common:
A generator.
Palas.
guidance system into the wind (Timon).
A tower to raise the turbine to where the wind.
batteries and electrical control system.
Organizing a little issue, I managed to reduce the project to just five systems, attacking slowly and one by one, not at all complicated. I decided to start the generator. Looking at the projects of other people online, I realized there were people who decided to become its own generator, wearing other resident energy permanent magnet motors, and others simply looking for a generator. So I decided to look for. Many people used
engines tape drives of old computers. The best for this are the 99-volt Ametek continuous work well as generators. Unfortunately, they are very hard to find, although you can always try other similar models of Ametek (In eBay , for example). Here is a site (in English) that discusses the strengths and weaknesses of the Ametek generators, very complete truth.
There are many other makes and models permanent magnet motor than the Ametek, but may not work as well, note that the permanent magnet motors were not designed to be generators. Normal engines when used as generators, must be driven much faster than its rated speed of operation to achieve a production similar to that of normal operation. With these data, we can draw a conclusion, we are looking for is an engine of stress with low speed. Away from engines with many revolutions and little tension, because it will be useless. What we seek, more or less, is an engine that gives us a useful voltage 12 V with a speed very low (325 rpm). When you have, for the test, connect to a 12 v bulb give a sharp turn to the engine by hand, if we really work, the bulb should go on as usual.
The main characteristics of this wind turbine can vary by type of motor or generator that you installed, but normally will be about efficient voltage 12V. Enjoy this invention making it as much as I translated for you:
After many searches for information all over the Internet, I realized that all designs had five things in common:
A generator.
Palas.
guidance system into the wind (Timon).
A tower to raise the turbine to where the wind.
batteries and electrical control system.
Organizing a little issue, I managed to reduce the project to just five systems, attacking slowly and one by one, not at all complicated. I decided to start the generator. Looking at the projects of other people online, I realized there were people who decided to become its own generator, wearing other resident energy permanent magnet motors, and others simply looking for a generator. So I decided to look for. Many people used
engines tape drives of old computers. The best for this are the 99-volt Ametek continuous work well as generators. Unfortunately, they are very hard to find, although you can always try other similar models of Ametek (In eBay , for example). Here is a site (in English) that discusses the strengths and weaknesses of the Ametek generators, very complete truth.
There are many other makes and models permanent magnet motor than the Ametek, but may not work as well, note that the permanent magnet motors were not designed to be generators. Normal engines when used as generators, must be driven much faster than its rated speed of operation to achieve a production similar to that of normal operation. With these data, we can draw a conclusion, we are looking for is an engine of stress with low speed. Away from engines with many revolutions and little tension, because it will be useless. What we seek, more or less, is an engine that gives us a useful voltage 12 V with a speed very low (325 rpm). When you have, for the test, connect to a 12 v bulb give a sharp turn to the engine by hand, if we really work, the bulb should go on as usual.
Subject: ESS.
Student: Pedro Jose Contreras Urbina
0 comments:
Post a Comment